How do we protect stored fuel?

Good housekeeping and purchasing clean, dry fuel from a reputable supplier are definitely step one.
In applications, such as emergency power generation, we recommend installing a fuel re-circulation/filtration system like the fully automated ALGAE-X® STS Fuel Conditioning and Filtration System.

These commercial high capacity systems typically have the following basic components: a pump, an ALGAE-X® Fuel Conditioner, a filter/water separator, a water block or fine filter, a timer, and an
 electronically controlled monitoring systems with alarms.

It is recommended to start out the program with implementing the ALGAE-X® Fuel Catalyst AFC-705 to stabilize the fuel in the tank. Additional components in AFC-705 Fuel Catalyst are corrosion inhibitors and lubricity enhancers to not only preserve fuel integrity, but also to protect your engine equipment.

Traditionally, biocides and filtration were the only treatment available. In many cases, we have seen that this regime caused more harm than good. The use of an adequate fuel quality management program and service, regular fuel testing to monitor fuel integrity are an absolute necessity and will save money. Periodically adding stabilizer is another common practice used for example with nuclear power plants, which all have back-up diesel powered generators.

Installing a dedicated ALGAE-X® Fuel Quality Management system that automatically operates and purifies the fuel is becoming a rapidly accepted standard maintenance for hospitals, computer and telecommunications companies.

We also need to remove from our storage tanks any water and monitor fuel quality for microbial contamination on regular intervals. Since most tanks do not have a water sump or a sloping bottom that can be drained at the lowest point, we may need to find other ways to remove water from the fuel supply. To remove water from fuel tanks we recommend the use of either the ALGAE-X® "Water Eliminator" or an ALGAE-X® Tank Cleaning / Fuel Conditioning and Filtration System.

The ALGAE-X® "Water Eliminator" is either a small nylon or a larger stainless steel cylinder, containing a special polymer. The polymer will absorb the water (not the fuel) for easy removal. The ALGAE-X® MTC is a compact mobile tank cleaning system used to remove water from the tank bottom and works as a fuel dialysis or fuel polishing system.